One of the important
security concerns of any corporation is
to restrict entry to the certain areas to avoid lack of confidentiality. This is usually achieved
by providing a lock with a sensor mechanism at
the door. The locks can either work on finger scanning principle or retinal
scanners might also be employed. The former principle provides a feasible
solution to add security to any door of the office.
We
provide you with the most reliable fingerprint door access
Techcom Engineering is
offering you door access system based on electromagnetic principle. What
electromagnetism is technically speaking, it refers to the conversion of material to magnetic material when we connect it to the
supply. Based on this principle, we provide you with a fingerprint door access.
Your fingerprints will be registered in the system and only those registered
people would be able to gain access to the entrance otherwise restricted. The
principle of working is made simple to ease the
customer during installation and use it. It simply needs to be bolted to the
door. A power supply is required to activate the system and then the
fingerprints of authorized person would be registered.
Use
our excellent door access system wherever safety is your highest priority
Material for the door access system is
also a huge area of research. We have chosen steel’s specific grade for the
plates of the lock which would be fitted on the door. One much known advantage
of using steel is that it is corrosion free.
One can expect long durability using this lock. It certainly has a high
strength too. Our lock is available in two models based on two different
principles. One is Fail-safe and other is Fail-Secure. As the name implies, the
first one is used when safety is a priority as in workplaces and homes etc. It allows the door to get opened once the
power is cut-off.
Where
security is the prime importance we suggest you use the fail-safe design
Above principle
actually creates a gap in security due to obvious reasons. That’s why where security is the prime
importance we suggest you use the fail-safe design in which lock won’t be
opened even if the power supply is cut-off. A primary check is also
incorporated in our locks which enables the user to remain assured if the power
supply is dropped below a certain level. We provide you with both designs as
per your requirement and the whole
system involve the digital screens.
Comments
Post a Comment